Paper Mill Machines

We offer a vast gamut of paper machine headbox that is extensively used in the paper industry and is manufactured from quality raw material. Competitively priced, our range of paper machine headbox provides optimum performance at the clients end. Some of the highlighting features of our range of head box are:

• Open Head Box for Machine speed upto 350 meters/minute.
  
• Slice width upto 3800 mm are regularly manufactured.
  
• Profile variations across the deckle in maximum ± 3 GSM
  
• Cylindrical Tapered and Rectangular Tapered with Polypick diffuser, Stainless Steel Diffuser & Manifold are provided depending upon the quality and production capacity.
  
• Two numbers Properly designed Evener rolls for evening effect and better deflocculation.
• Machined and Ground Top and Bottom Lip for smooth flow of stock.

Available with us is an exhaustive range of wire part, also known as fourdrinier part that is precision engineered and offers high reliability and durability. Our range of fourdrinier part is widely demanded in the international market and is available either with cantilever type or run-out type wire changing arrangements.

Features:

• High efficiency wire part with Plain Couch roll.
• Drainage elements designed as per the Machine speed, Stock freeness and other properties.
• Auto or Manual Wire guiding arrangement.
• Cantile arrangement on framing for quick wire change.
• MS fabricated frame with 2 mm S.S cladding

We offer a range of industrial cylinder moulds that is one of the primary constituents of paper or board machine. Cylinder moulds are used for controlling stick flow and pick-up on the point of contact and enables good single layer and multi layer formation and substance profile across the full web. The mould also contains C.I. Spiders with stainless steel, brass strip, phosphorus, bronze spiders with brass rods and strips and wounding stainless steel 304, 10 Gauge wire. Moreover, it is accurately balanced.

• Totally in stainless Steel Construction.
  
• Suitable for Machine speed of 120 MPM
  
• Least Profile Variation
• Very good formation and sheet pickup of 35 GSM to 120 GSM
• Zero fiber loss due to rubber cord sealing
• Better dewatering with Air suction on the wire
• Adjustable Couch roll off center
• SS Suction knife for removal of water at couch nip
• Pressurized feed with Custom designed Tapered Manifold or octopus distributor and Evener roll for uniform distribution

We manufacture a range of reformer machine that is precision engineered and is fabricated using premium quality raw material. Used in paper machine, these reformer machines are high on performance and durability and can be also be customized as per the requirements of the clients.

Features:

• Totally made out of S.S. 304 quality plates
• Tapered flow header for uniform velocity condition
• Holley rolls for good deflocculating and turbulence
• Least Profile variation
• Suitable for machines up to 120 mt/min speed
• Good formation of sheet due to lower consistency of stock ranging from 0.15% to 0.25%

Keeping in mind the increasing energy cost for removing the last traces of moisture by evaporation, we offer a range of paper dryer system components that are designed to offer superior drying efficiency and uniform drying control. These paper dryer systems are also available in heavy duty cast iron framing and are accurately designed condensate system, contributing to the evaporation economy. For proper and safe removal of condensate, the drying cylinder can be provided with stationary siphons or inside mounted bucket system.

• M.S. (B.Q. Plate) Fabricated Drying Cylinders with high evaporation rate.
• Available in 4 feet, 5 feet and 6 feet diameter.
• Shell thickness varies from 25 mm to 36 mm
• Operating Pressure up to 4.5 Kgs/ Cm 2 and specially designed for higher working pressure upto 6.0 Kgs/ Cm 2
• Suitable Heavy Duty framing in Graded Cast Iron and Mild Steel fabrication for the maximum coverage of paper at dryer.
• Rope feeding system is provided for Machine speed over 200 MPM
• Framing is designed for Ground Floor as well as I st Floor Machine
• Dryer surface ground finish to Ra 8 micron balanced dynamically to grade of 6.3 (ISO 1940)

We provide a range of M.G. Section that is fabricate using premium quality material and can be custom-made in accordance with the specifications given by individual clients. Reasonably priced, these M.G. Sections have the following highlighting features:

• MS fabricated M.G. Cylinder up to 16 feet (4.88 meter) diameter.
• Width upto 4.00 mtrs is in regular production.
• SS Coating on surface (Optional)
• Stress relieved for removing stresses developed during bending and fabrication.
• Surface is machined and ground to achieve Mirror finish on the surface - Finish Ra 8 micron.
• Scooping system is provided to remove condensate efficiently.
• Heavy duty framing is provided for vibration free operation.
• Single and double Touch roll is provided depending upon the process requirement.
• Spur Gear and pinion in Cast Iron/ MS Fabrication/ polypick, teeth are geometrically evenly cut on precise Hobbing Machine for noise free operation.
• MG Cylinder is designed to operate on working pressure up to 6.0 Kgs/cm².
• Hydraulically tested to a pressure of I 1.0 Kgs/cm² and held for 24 hrs.

We offer our clients an assortment of pope reel that are easy to install and are extremely durable. Available at industry leading prices, our range of pope reel is smooth in operation and is safe to use. Some of the features of our gamut of pope reel are:

• Pope Reeler is designed on the principal of Friction Winding.
• Primary Grab Arm is Pneumatically / Hydraulically loaded and titled Hydraulically/mechanically with manual operation.
• Secondary arm is loaded Pneumatically/Hydraulically
• Pope drum is MS fabricated and designed to withstand required nip pressure and provided with Doctoring arrangement.
• Framing is Heavy Duty in Cast Iron construction.

Available with us is an array of vacuum pumps that forms the core of the paper machine and is manufactured from premium quality raw material. Reasonably priced, our assortment of vacuum pumps offers high performance and reliability. Moreover, these pumps can also be customized as per the requirements of the clients.

We fabricate a range of paper rewinders that is one of the important components of paper machine. Competitively priced, these paper rewinders are easy to install and maintain and are can be customized as per the specifications of the clients.

Features:

• Heavy Duty Rewinder for trimming and rewinding of Paper Web in required Reel Size.
  
• Rewinding is done by friction on double drum rolls duly loaded with chrome coated Rider Roll.
  
• Slitting arrangement is provided with pneumatically loaded trimming knives.
  
• MS fabricated with frame proper stiffeners with Cast Iron Slide rail.
  
• Rider Roll is pneumatically balanced.
• Pusher roll for dislodging the rewound roll on collecting table.
• Pneumatically operated braking arrangement.
• Trim Handling system is provided with Blower and Dual Ventury.
• Maximum operating speed is upto 500 MPM and driven by DC/AC variable speed drive.